Using the ATEM 1 M/E Broadcast Panel
47
ATEM 1 M/E Broadcast Panel
KEY
KEY
KEY
1
2
3
LUMA
CHROMA
PATTRN
KEY
KEY
KEY
MASK
MENU
KEY
KEY
KEY
KEY
1
2
3
1
2
3
4
4
5
6
LUMA
CHROMA
PATTRN
DVE
KEY
KEY
KEY
7
8
9
MASK
MENU
HOME
CAM
0
CLR
Control Panel
Main
ON
ON
ON
ON
Backup
BACKUP 12V POWER
USB 2.0
Switcher
Main
CUT
DSK 1
DSK 2
FILL
BKGD
KEY 1
KEY 2
KEY 3
KEY 4
TIE
TIE
Backup
DIP
MIX
SHIFT
DSK 1
DSK 2
CUT
CUT
PREV
DSK 1
DSK 2
TRANS
CUT
AUTO
AUTO
AUTO
FTB
ATEM Mix Effects
Using the ATEM 1 M/E Broadcast Panel
Control Panel Overview
The ATEM 1 M/E Broadcast Panel plugs in using an Ethernet connection to the ATEM switcher.
This keyboard has similar functions to the software panel, and the main buttons are laid out in a similar M/E
style, so it's easy to move between the hardware and software interfaces.
If fast and critical live switching is being done, then the ATEM Broadcast Panel is an incredibly fast and
robust control solution. There's nothing like pushing high quality buttons on a panel to ensure fast and
accurate switching!
When using the hardware broadcast panel and software panels together, any change on one panel will be
reflected on the other, and you can use both panels at the same time. You can also plug in more than one
broadcast panel.
KEY
4
Using the Control Panel
DVE
HOME
Mix Effects
The program bus, preview bus and source names display are used together to switch sources on the
program and preview outputs.
MAIN 12V POWER
ETHERNET 2
ETHERNET 1
Source Names Display
ON
ON
The source names display uses a 4 character label to represent the switcher's external inputs or internal
CUT
BKGD
KEY 1
KEY 2
FILL
sources. Labels for the 8 external inputs can be edited on the settings tab of the software control panel.
Labels for the internal sources are fixed and don't need to be changed.
DIP
MIX
Pressing the SHIFT button will change the source names display to show extra sources, called shifted
SHIFT
sources, allowing selection of up to 20 different sources.
When aux has been selected in the system control block, pressing the SHIFT and CUT/FILL buttons
PREV
CUT
AUTO
TRANS
simultaneously will change the source names display to show protected sources, available for routing to
auxiliary outputs. Protected sources are program, preview, clean feed 1 and clean feed 2.
Program Bus
The program bus is used to hot switch background sources to the program output. The source currently on
air is indicated by a button that is illuminated red. A blinking red button indicates that the shifted source is
on air. Pressing the SHIFT button will display the shifted source.
1
2
3
4
5
6
7
8
9
CAM
0
CLR
Control Panel
Main
ON
ON
Backup
Switcher
Main
DSK 1
DSK 2
KEY 3
KEY 4
TIE
TIE
Backup
DSK 1
DSK 2
CUT
CUT
DSK 1
DSK 2
FTB
AUTO
AUTO