Publicidad
Idiomas disponibles
Idiomas disponibles
Working with USB 3.0
Working with USB 3.0
112
Before connecting Blackmagic Design USB 3.0 hardware to your computer
It is essential to install the latest USB 3.0 software drivers and internal software for your USB 3.0 equipped
motherboard, before connecting your ATEM Production Switcher to a Windows computer. Currently the
Renesas USB 3.0 host controller uPD720200 is used by all motherboards recommended by Blackmagic
Design, and requires the installation of the latest Renesas Electronics USB 3.0 drivers and internal software.
These updates can be found on the websites of motherboard and computer manufacturers as well as via
third party driver websites.
Media Express
Blackmagic Media Express software lets you capture uncompressed video from the ATEM 1 M/E and 2 M/E
production switchers using a compatible Windows PC with USB 3.0. Whatever video and audio is output
on Aux 1 is also output on the USB 3.0 port. This video and audio can be captured by Blackmagic Media
Express to uncompressed or intraframe-compressed files which are perfect for post production. Media
Express is documented later in this manual.
If your computer does not have a suitable USB 3.0 port, but has PCI Express slots, you can use any DeckLink
card on Mac OS X, Windows and Linux to capture the SDI output of your ATEM switcher. Computers with a
Thunderbolt
port can also capture the SDI output by using an UltraStudio model with a Thunderbolt port.
™
If your Mac or Windows computer does not have PCI Express slots or a Thunderbolt port, you can use
a H.264 Pro Recorder, connected via USB 2.0, to capture the SDI output of your ATEM switcher to H.264
compressed files.
UltraScope Waveform Monitoring
Blackmagic UltraScope software lets you perform waveform monitoring from the ATEM 1 M/E and 2 M/E
production switchers using a compatible Windows PC with USB 3.0. Whatever video and audio is output on
Aux 1 is also output on the USB 3.0 port and can be monitored live by Blackmagic UltraScope. Blackmagic
UltraScope is documented later in this manual.
If your computer does not have a suitable USB 3.0 port, but has PCI Express slots, you can use an UltraScope
card on Mac OS X and Windows for waveform monitoring of the SDI output of your ATEM switcher.
Alternatively you can use a Blackmagic SmartScope for waveform monitoring of the SDI output of your
ATEM switcher.
Publicidad
