Publicidad
Idiomas disponibles
Idiomas disponibles
Using ATEM Software Control
42
To set the video standard, select the video standard from the menu, and then select the set button. Any time
the video standard is changed, it will erase any frames you have loaded into the media pool.
Setting the Audio Output Behavior
The audio out setting is available for ATEM 1 M/E, 2 M/E and Production Studio 4K models. This setting lets
you select whether the XLR audio connectors output program audio or monitor audio.
Program audio is the same audio that the audio mixer sends to the SDI and HDMI program outputs. Monitor
settings and solo monitoring are disabled in the audio mixer when program audio is selected.
Monitor audio allows you to listen to the program audio mix of all inputs, or just a solo input, at your
Set the audio output behavior
preferred volume level and without affecting the audio on the program output. These monitor settings are
only available to the audio mixer when monitor audio is selected for the audio out setting in the settings tab.
When you use monitor audio to listen to a solo audio source, all other audio output is muted on the audio
output. Selecting solo in the audio mixer does not affect the program output audio. You can monitor the
solo audio source regardless of whether or not it is on air.
For maximum flexibility, The ATEM 2 M/E Production Studio 4K even features separate XLR Monitor outputs
that can be switched into an extra pair of program audio outputs.
ATEM Television Studio does not have an independent audio output for monitoring and is always set to
program audio. The program output connections provide SDI and HDMI embedded audio for monitoring.
Publicidad
