Publicidad
Idiomas disponibles
Idiomas disponibles
Using ATEM Software Control
Using ATEM Software Control
28
Interface Overview
The ATEM Software Control is included with your ATEM switcher, and allows you to control your switcher in
a similar way to a full hardware control panel. However instead of menu buttons, it uses a range of pallets
on the right side that shows you all processing features of your production switcher, and allows settings to
be easily made.
You can also use the ATEM Software Control to configure your switcher settings as well as upload graphics
and manage the media pool.
Switcher Control Panel
The software control panel has four tabs: Switcher, Audio, Media and Settings. You can select a tab from the
bottom of the window or by pressing the Shift and left/right arrow hot keys. The media, audio and settings
tabs contain unique settings for the switcher, which can only be made from the software control panel.
When first launched, the switcher screen is selected, which is the main control interface for the switcher.
The software control panel must be connected to a switcher to run.
Mouse or Trackpad Operation
The virtual buttons, sliders and fader bar on the Software Control Panel are operated using your computer
mouse or a trackpad if you're using a laptop.
To activate a button, click once with the left mouse button. To activate a slider, click and hold down the left
mouse button while dragging. Similarly, to control the fader bar, click and hold down the left mouse button
on the fader bar handle and drag up or down.
Publicidad
