Publicidad
sor does not work by draining excess water to the outside.
- Built-in sterilisation process assessment system
This uses a microprocessor to continuously monitor the sterilisation
process parameters. In the event of a fault, it immediately stops the
program and generates alarms.
- Steriliser operation monitoring
When the machine is powered, this monitors all of its important
parameters in real time. In the event of a fault, it generates alarm
messages and, if necessary, stops the cycle.
2.3 Accessories included in the medical device
certification
Only the following accessories are included in the medical device
certification:
- The tray support
- 5 trays
- 1 tray extraction pincer
- 1 filling hose
- 1 drain hose
- 1 funnel
- 1 bottle of lubricating oil
Any other accessory mentioned in this manual does not form part of
the CE 0051 certification.
TYPE TESTS CARRIED OUT ON AUTOCLAVES
Type test carried out in accordance with the EN13060 standard
Type B cycles
Pressure dynamic in sterilisation
chamber
Air leakage
Empty chamber
Solid load - Double wrapping
Small porous load
Double wrapping
Full porous load
Double wrapping
Narrow lumen element
Drying, solid load
Double wrapping
Drying, full porous load
Double wrapping
Cycles B
Cycles S
X
X
X
X
X
X
X
X
X
X
-
X
X
X
X
X
-
X
EN
47
Publicidad
