Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 18 Friday, April 26, 2024 11:05 AM
18 OPERATION
Temperature Units
Set the oven temperature display to show either
Fahrenheit or Celsius units.
The oven defaults to Fahrenheit unless changed by
the user.
Setting Temperature Units
1
Press SETTINGS at the center bottom of the
Main screen, swipe to the third Settings
screen, and press Temperature Units.
2
Select
8
or
7
and press OK.
TM
Smart Diagnosis
TM
Smart Diagnosis
can be run through a
smartphone application or by calling for support.
Place your smartphone's mouthpiece near the top
left corner of the screen. See "Smart Diagnosis
Function" in the Smart Functions section for
detailed instructions.
1
Press SETTINGS at the center bottom of the
Main screen, swipe to the third Settings
screen, and press Smart Diagnosis
2
Press START to start the diagnostic tone.
Factory Data Reset
This function returns all settings to the factory
defaults.
CAUTION
• All stored data will be deleted.
1
Press SETTINGS at the center bottom of the
Main screen, swipe to the third Settings
screen, and press Factory Data Reset.
2
If you want to reset data to the factory
defaults, press RESET and then OK.
Open Source License
This screen displays a list of the open source
software contained in this product. Refer to the
indicated licenses for the terms and conditions of
their use.
1
Press SETTINGS at the center bottom of the
Main screen and swipe to the fourth Settings
screen.
2
Press Open Source License.
Oven Cooling
The oven cooling icon appears in the display if the
temperature inside the oven is high during or after
operation. The icon disappears if the oven
temperature is below 210 ℉ (100 ℃).
Timer
The oven timers don't affect oven operation or
cooking time. Use them as extra kitchen timers.
Once the time runs out, the oven chimes and
"Timer 1 or 2 finished" appears in the display.
TM
.
Setting the Timer
1
Press either clock icon at the bottom of the
display.
Clock icon
2
Scroll through the numbers in the popup until
the desired time appears in the display, or
press the number pad icon to enter the
numbers directly, and press OK.
Number pad icon
10:25
AM
Publicidad
