Ethicon Echelon Flex PCEE45A Manual Del Usuario página 17

Recommended separation distances between portable and mobile RF communications equipment
and the ECHELON FLEX™ Powered Plus Articulating Endoscopic Linear Cutters
The ECHELON FLEX™ Powered Plus Articulating Endoscopic Linear Cutters are intended for use in an electromagnetic environment
in which radiated RF disturbances are controlled. The customer or the user of the ECHELON FLEX™ Powered Plus Articulating
Endoscopic Linear Cutters can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the ECHELON FLEX™ Powered Plus Articulating Endoscopic Linear Cutters as
recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
Transport and Storage Conditions
Temperature: -20 ºC — 25 ºC
Relative Humidity: 10% — 60%
Pressure: 500 — 1060 hPa
Operating Environment Conditions
Temperature: 10 ºC — 40 ºC
Relative Humidity: 30% — 75%
Pressure: 800 — 1060 hPa
How Supplied
The ECHELON FLEX™ Powered Plus Articulating Endoscopic Linear Cutters are supplied sterile for single patient use. Discard after use.
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
Not applicable
10
m
80 MHz to 800 MHz
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
0.23
0.73
2.3
7.3
23