ABB IRB 5720 Manual Del Producto página 333

6
7
8
9
Inverted robot: Attaching the motor lifting accessory
Manual del producto - IRB 5720
3HAC079195-005 Revisión: A
Action
Lower the motor into position.
• Make sure that the motor pinion is properly
mated to the gear in the gearbox.
• Make sure that the motor pinion does not
get damaged.
• Make sure that the direction of the cable
gland exit is facing the correct way.
Secure the motor with its attachment screws and
washers.
Use a bits extender to reach the screws.
Disconnect the brake release tool.
Perform a leak-down test (if not already done).
Nota
This procedure is valid for inverted robots.
© Copyright 2022 ABB. Reservados todos los derechos.
5 Reparación
5.8.1 Replacing the axis-1 motor
Continuación
Note
xx2100002186
Tornillo de cabeza hexagonal:
M10x30 12.9 Gleitmo 603+Geomet
500 (4 uds.)
Extensor de bits: 3HAC12342-1
Tightening torque: 50 Nm.
xx2100000503
See Realización de una prueba de
fugas en la página 190.
Continúa en la página siguiente
333