Ethicon Enseal X1 Manual De Instrucciones página 5

Dimensions
NSLX125C, NSLX137C, NSLX145C,
Jaw length 24 mm
Jaw width 5 mm
Shaft length
25, 37, or 45 cm from jaw tip to rotation
knob
Shaft
5 mm
diameter
Power cord 3 m
length
Generator Audible Indicators
Refer to the following table for generator audible feedback tones. For a list of alarms, refer to the
Generator G11 (GEN11) Operator's Manual.
Tone
Activation
Continuous steady beeping
Tone
End Tone One short beep
Illustration and Nomenclature (Illustration 1)
1. Jaws
2. End of Knife Slot
3. Knife (not visible)
4. Shaft
5. 360° Rotation Knob
6. SEAL Button
7. CUT Button
8. Closing Handle
9. Grip Housing
10. Attached Power Cord
Storage Conditions
Temperature: ≤ 30°C
Relative Humidity: 10% – 65%
Storage and Transport Conditions
Keep Dry
Keep Away From Heat
X125CCN, X137CCN, X145CCN
(Curved Jaw)
Description
Generator On: Device is active.
End of cycle: Energy is stopped.
2
Action