Universal Robots e Serie Manual De Usuario página 67

EU Declaration of Incorporation in accordance with ISO/IEC 17050-1:2010
Incorporation:
It is declared the above products fulfil, for what is supplied, the following Directives as
detailed below:
When this incomplete machine is integrated and becomes a complete machine, the integrator is responsible for
determining that completed machine fulfils all applicable Directives and update the harmonized and other
standards.
The following essential requirements of the EU Machinery Directive have been fulfilled:
I Machine Directive
2006/42/EC
II Low-voltage Directive
2014/35/EU
III EMC Directive 2014/30/EU
Reference the harmonized
standards used,
referred to in Article 7(2) of the
MD and LV Directives
and Article 6 of the EMC
Directive:
Reference to other technical
standards and specifications
used:
The manufacturer, or his authorised representative, shall transmit relevant information about the
partly completed machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas,
certificate #DK013489.
UR5e
Universal Robots e-Series (UR3e, UR5e, UR10e and UR16e) shall
only be put into service upon being integrated into a final complete
machine (robot system, cell or application), which conforms with the
provisions of the Machinery Directive and other applicable Directives.
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.6, 1.3.4, 1.3.8.1, 1.5.1, 1.5.2,
1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3
It is declared the relevant technical documentation has been
compiled in accordance with Part B of Annex VII of the Machinery
Directive.
Reference the LVD and the harmonized standards used below.
Reference the EMC Directive and the harmonized standards used
below.
(I) EN ISO 10218-1:2011
(I) EN ISO 13849-1:2015
(I) EN ISO 13732-1:2008, (I) EN ISO 13849-2:2012,
(I) EN ISO 13850:2015, (I) EN ISO 1037:1995+A1:2008
(II) EN 60204-1:2006/ A1:2010, (II) EN 60320-1:2001/ A1:2007
(II) EN 60529:1991/ A2:2013, (II) EN 60947-5-5:1997/ A11:2013
(II) EN 61131-2:2007, (II) EN 61140:2002/ A1:2006
(III) EN 61000-3-2:2014, (III) EN 61000-3-2:2013
(III) EN 61000-6-1:2007, (III) EN 61000-6-2:2005
(III) EN 61000-6-3:2007+A1, (III) EN 61000-6-4:2007/ A1:2011
(III) EN 61326-3-1:2008
(I) ISO 9409-1:2004 [Type 50-4-M6], (I) ISO/TS 15066
(I) EN 60947-5-8:2020
(II) EN 60664-1:2007, (II) EN 60664-5:2007, (II) IEC 61784-3:2010
[SIL2]
(III) IEC 60068-2-1: 2007, (III) IEC 60068-2-2:2007
(III) IEC 60068-2-27:2008, (III) IEC 60068-2-64:2008
(III) IEC 61326-3-1:2008
ISO 14664-1:2015
[Fraunhofer Certificate #UN 2301-1381]
TÜV Nord Certificate #44 708 14097607
TÜV Nord Certificate #44 207 14097610
Industrial locations SIL 2
,
as applicable
Manual de usuario