Eu Declaration Of Incorporation In Accordance With Iso/Iec 17050-1:2010 - Universal Robots UR5 Traducción De Las Instrucciones Originales

Reference to Harmonized Standards Used:
(I) EN ISO 10218-1:2011 as ap-
plicable
(I) EN ISO 12100:2010
(I) EN ISO 13732-1:2008
(I) EN ISO 13849-1:2008 & 2015*
*Note: From the 2008 to the 2015
editions, there are no changes
relevant to our robots TUV Nord
Certificate 4478014097602
Reference to Other Technical Standards and Specifications Used:
(I) ISO/TS 15066 as applicable
(III) IEC 60068-2-1:2007
(III) IEC 60068-2-2:2007
The manufacturer, or his authorised representative, shall transmit relevant information
about the partly completed machinery in response to a reasoned request by the
national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body
Bureau Veritas, certificate #DK008850.
UR5/e-Series
B.1 EU Declaration of Incorporation in accordance with ISO/IEC 17050-1:2010
(I) EN ISO 13849-2:2012
(I) EN ISO 13850:2015
(I) EN 1037:1995+A1:2008
(II) EN 60204-1:2006/ A1:2010
(I) EN ISO 13850:2015
(II) EN 60320-1:2001/ A1:2007
(II) EN 60529:1991/ A2:2013
(III) IEC 60068-2-27:2008
(III) IEC 60068-2-64:2008
(II) IEC 60664-5:2007
(III) IEC 61326-3-1:2008
(II) EN 60664-1:2007
(II)
A11:2013
(II) EN 61000-6-2:2005
(III)EN
A1:2011
(III)EN 61131-2:2007
(II)
A1:2006
(II) IEC 61784-3:2010 [SIL2]
ISO 14664-1:2015 Class 5
for
control assembly with en-
closure
and Class 5 for UR3, UR5
and UR10 manipulators
I-62
EN 60947-5-5:1997/
61000-6-4:2007/
EN 61140:2002/
Versi ´ on 3.11