Ciber UACF15P1-P2 Manual De Operación página 367

CONVERSOR DE FREQUÊNCIA DA BOMBA DE ASFALTO
ASFALTO ASPHALT PUMP FREQUENCY CONVERTER
BITUME
(EN)
Warning messages and alarms
A warning message or alarm will show up on the display in the form of a number code Err. xx. A warning will show on the
display until the failure is corrected, while an alarm will continue blinking until the [STOP/RESET] button is pushed.
This table shows the different warnings and alarms and indicates if the failure blocks the frequency converter. After a
block from a trip the electric power is cut and the failure corrected. The electric network comes back on and the frequency
converter is reset. The frequency converter is now ready. A trip can be reset manually by an operation button
[STOP/RESET].
Indication by LED:
Warning: Yellow;
Alarm: Red;
Locked by trip: yellow and red.
No.
2 LIVE ZERO ERROR
4 MAINS PHASE LOSS
5 DC LINK VOLTAGE HIGH
6 DC LINK VOLTAGE LOW
7 DC LINK OVERVOLT
8 DC LINK UNDERVOLT
9 INVERTER TIME
10 MOTOR TIME
11 MOTOR THERMISTOR
12 CURRENT LIMIT
13 OVERCURRENT
14 EARTH FAULT
15 SWITCH MODE FAULT
16 CURR. SHORT CIRCUIT
17 STD BUS TIMEOUT
18 HPFB TIMEOUT
33 OUT FREQ RNG/ROT LIM
34 PROFIBUS OPT.FAULT
35 INRUSH FAULT
36 OVERTEMPERATURE
37-
INTERNAL FAULT
45
50 AMT not possible
51 AMT TYPE DATA FAULT
54 AMT WRONG MOTOR
55 AMT TIMEOUT
56 AMT WARN. DURING AMT
99 LOCKED
08/2010 CC.15 / CC.17 / CC.19
Description
CONVERSOR DE FRECUENCIA DE LA BOMBA DE
CONVERTISSEUR DE FRÉQUENCE DE LA POMPE À
Warning
76179/0004
02.02.08
Alarm Locked by trip
7 / 24